BC EPR Injection

Product Description:-

BC EPR injection is a 100% reactive, two component material designed as a moisture insensitive adhesive for numerous injection and sealing needs. This high modulus material is formulated at a very low viscosity for deep penetration into fine cracks.

Mixing:

All materials should be in the proper temperature range of l 6°C to 32°C.

When not using a two component pump, mix parts A and B (resin & hardener) for 2 minutes using a drill and mixing prop. For ease of mixing, add the part B to the part A (not the reverse). The epoxy must be well mixed to ensure proper chemical reaction.

Crack Healing:

After mixing, pour or squeegee epoxy into cracks and allow to seep in. Continue to apply material until crack is full.

Clean-up:

Clean tools and equipment with solvent such as BC tee solventl 01 , xylene, xylol, toluene or MEK. Do not allow the resin to harden in the equipment.

Health & Safety:

Epoxy components may cause irritation; avoid contact with skin and eyes. Always wear protective clothing (rubber gloves, eye protection, etc.) when using product. Always use goggles when injecting at pressure. Solvents used for

Clean-up are flammable. Keep away from heat, sparks, open flame or lit cigarettes

Packaging:

3.785 Kg .